The characteristics of injection molding toys：

● The limitations of the original design are low and can be complex or simple.

● PVC injection craft allows producers to split the molds according to the color and structure of the original design, so that the details of each part can be clearly presented.

● The internal structure of PVC injection molded toys is solid, which makes the overall weight of the toy heavier than that of many materials.

● PVC plastic is a commonly used raw material for injection molding toysin designer toy field, and according to the design needed, the producer will also combine with ABS injection craftand even vinyl carft.

● The production of injection molding toys requires the use of large injection molding machines, and the production of molds is usually made of steel. Most enterprises have introduced fully automated equipment, which brings higher production efficiency. For large production orders, it can greatly shorten the production time and reduce the production cost.

PVC injection molding toys also have unavoidable disadvantages. First of all, the production cost of steel molds is relatively expensive. In addition, there may be split lines and splaymark on the surface of PVC injection molding toys. But split line can be smoothed by polishing and experienced operators can adjust temperature, hardness to avoid the spraymark as much as possible.

The following is the mainly production process of PVC injection molding toys:

● Design: First of all, the designer will design according to the design requirements of the toy, including graphic design and 3d model, color matching.

● Mold making: Making the steel molds for injection, and setting up the molds in the large injection molding machines.

● Mass Production: In the process of injection molding, plastic raw materials will enter the mold through the nozzle of the injection molding machine, and cool and cure into parts in the mold. After the parts are trimmed and inspected, they are painted, assembled, and finally packaged according to the customer's needs to become the final product.

In recent years, "designer toys" have become a popular trend among young people, captivating them and enticing them to spend money on them. Do you really know whay are they?

The common types of designer toys are rich and diverse, and there are mainly the following types according to the material: vinyl toys, injection molded toys and resin toys. Here will give you a detailed introduction to the characteristics of vinyl toys, so that you can have an in-depth understanding of this type of toy. 

Vinyl toys, as the name suggests, are toys made of vinyl as the main material. The surface of this toy is smooth, without any complex craft lines, showing a simple and delicate beauty. At the same time, the structure of the vinyl toy is hollow, which makes the overall weight of the whole toy relatively light, and there will be no much feeling of weight in the hand.

In terms of shape design, the vinyl toy is relatively simple with few complex details. This simplified design style allows people to pay more attention to the overall shape and color matching of the toy when appreciating the toy. In addition, the raw material of vinyl toys is mainly PVC, which has strong stability and makes the toys have high durability.

Regarding the disadvantages of the vinyl process, because the splitting process of the vinyl toy is simple, it limits the structural design of the toy, making some complex and fine parts unable to be produced. At the same time, since the vinyl toy is hollow, they are easy to deformation because of the great temperature difference,  which will affect its beauty and service life.

On the other hand, vinyl toy didn’t have great weather resistance, with improper preservation it will be prone to fading, falling off and other problems. In addition, due to the need for high temperature firing in the production process of vinyl toys, if the process is not in place, the surface of the toy may appear bubbles, surface is not smooth and other phenomena, which is a common quality problem in the production of vinyl toys. This requires that the factory must be equipped with experienced process masters to avoid quality costs to the greatest extent.

In addition, the production mold of vinyl toys is mainly copper mold. In the production process of copper molds, seed mold and bulk molds are the main classification. Seed Molds are mainly used for the production of small batch samples, while bulk molds are used for mass production. The process of making vinyl toys can be roughly divided into the following steps:

● Design stage: Designers design characteristic graphic and 3d model according to market demand and creative inspiration.

● Mold opening stage: make seed mold and bulk molds for trial production.

● Production process: Start the mass production for the order including vinyl crafting, painting, assembling and packaging. 

Chomp figures, Abominable Toys' first character, originated as a quick sketch by Connor McConnell during his high school years. Later, this character was brought to life by Benjamin Su, an animator. Abominable Toys is an art toy company that was founded by collectors for collectors. They began releasing pins and t-shirts in June of 2018 and debuted their first Chomp vinyl figures in December of the same year.

We had the pleasure of collaborating with Abominable Toys to create their first Chomp Figure. Our production quality and service capabilities exceeded their expectations, and they were quite satisfied with the final product. As a result, we continued to collaborate with them to produce Chomp dolls in various colors and sizes.

 

 

 

 

The Chomp Figure is a testament to the creativity and imagination of both Abominable Toys and our team. It is a high-quality collectible that has been meticulously crafted to perfection. The figure's intricate design and exquisite craftsmanship are a testament to our dedication to our craft.

In the past few years of our collaboration, we have developed multiple versions Chomp, including different colors, sizes, and materials. In short, we have many versions of Chomp figures.

The SULLY 6-inch vinyl figurine is an artwork that is the result of a collaboration between three of the most distinguished and celebrated artists of our time, namely @DISPLAYGEEK, @CSSULLY, and @MRCOLLECTIT. The figurine is not only a mere product but a testament to the artists' creativity, imagination, and dedication to their craft. 

 

 

The SULLY figurine comes in two exquisite variants, the regular and blacklight versions. The regular version is a limited edition with only 100 units produced, while the blacklight version has a production run of 125 units，and the blacklignt figure can light in the dark that make it looks like a shining star. Each variant is unique in its own way and has been meticulously crafted to perfection.

 

 

 

 

 

 

The figurine is made from high-quality vinyl, which is known for its durability and versatility. The vinyl material used in the creation of the SULLY figurine is of the highest quality, ensuring that it will last for years to come. The exquisite craftsmanship of the figurine is evident in every detail, from the intricate design to the flawless finish.

In conclusion, the SULLY 6-inch vinyl figurine is a true masterpiece that embodies the very essence of art. It is an artwork that will not only enhance your collection but also inspire you to appreciate the beauty of art in all its forms.

If you're a art toy collector or just enjoy creating your own unique designer toy, making your own vinyl toys can be a fun and rewarding project. Vinyl toys are popular among collectors and enthusiasts because of their limited edition and unique artistic attributes. You just need a design sketch of a cool art toy, you can create your own one-of-a-kind vinyl toys.So how to make a vinyl toy?

Step 1: Design Your Toy

The first step in making your own vinyl toy is to come up with a design. You can start by sketching out your ideas on paper or using computer software to create a 3D model. Consider the size, shape, and features of your art toy as you design it. Think about what element you will need to bring your design to real art toys.

Step 2: Create a Prototype

Once you have a design in mind, you can create a prototype of your toy. This will allow you to see how your design looks in real life and make any necessary adjustments before moving on to the next step. You can use clay or 3D printer machine to create your prototype. Also you can ask us to help you make your toy prototype.

Step 3: Make a Mold

After you have a prototype, you will need to consider a mold solution and  make molds of it. This will allow you to create multiple copies of your toy. To make a set mold, you will need silicone rubber and a casting box. You will also need to carefully follow the instructions for mixing and pouring the PVC raw material.

Step 4: Cast the Toy Parts

Once you have mold, you can start casting your vinyl toy parts. To do this, you will need liquid vinyl and a casting machine. You will pour the liquid vinyl into the mold and let it dry. The drying time will depend on the size and shape of your toy part.

Step 5: Paint the Toy Parts

After your vinyl toy parts has dried, you can paint the parts according to the overall design colorway.Of course, before this, manual polishing of various components is also necessary.

Step 6: Assemble Toy Parts

After all the components are ready, the final assembly step can be carried out. You need to glue all the components together in the corresponding order and position with art toy specific environmentally friendly adhesive. Of course, you also need to customize a unique gift box for your designer toys to package them.

All in all, it may take some time and effort to complete all the relevant steps, but the end result will be worth it. Of course, as a professional designer toy manufacturer, Demeng Toy provides one-stop service, you only need to provide your art toy design, and leave the rest to us!