Note:
The toy figure images shown on our website are intended solely as references for customization and are not available for purchase. As a professional ODM/OEM toy manufacturer, we focus on customizing and producing toy figures of comparable style. If you have an original figure design you’d like to produce, please reach out to us for a quotation.
| Material | Detail & finish | Behavior at contact regions | Pattern and paint hold |
|---|---|---|---|
| ⭐ Injection PVC (first choice) | Sharp detail, bright color lock | Rigid enough for load-bearing contacts; accepts over-molded soft accents | Excellent hand paint and pad print adhesion |
| Soft PVC over-mold accents | Flexible touch zones | Prevents creaking at pressed contact; adds grip feel | Takes paint poorly; keep soft parts solid color |
| ABS | Crisp edges, tight tolerance | Best for precision interlock pegs between characters | Good print adhesion |
| Rotocast vinyl | Hollow volume, seamless face | Skins can dent at narrow contact points; not ideal for load path | Good hand paint hold |
| Resin cast | Finest detail | Brittle at thin contact arms; fragile in a hug | Excellent hand paint |
| PVC + steel base insert | N/A | Carries composite gravity below the visible design | N/A |
| Station | What it decides | Why interaction poses stress it |
|---|---|---|
| Pose freezing in sculpt | The exact millimeters of every contact | Contacts cannot be adjusted after mold cutting without Tier 3 changes |
| Contact surface mapping | Which touch points carry load, which are cosmetic | Load must land on the largest contact; cosmetic contacts need clearance so they never carry load accidentally |
| Composite gravity check | Where the combined mass centers | The hug moves mass sideways; the footprint must be redrawn for the pair, not one character |
| Mold split planning | Where seams cross the embrace | Splits through a visible contact double the seam risk; splits hidden inside the contact need draft engineering |
| Split-and-assemble decision | One sculpted piece versus parts | Parts make painting and repair possible; a single piece removes assembly wobble |
| Pattern wrap painting | Spots, stripes and clothing prints | Patterns must continue across part lines; alignment is set at sculpt, proven at first article |
| Assembly with contact masking | Order and protection during finishing | Painted contacts must not scuff during assembly; masks and touch-up stations are planned per figure |
| Tilt and drop verification | Proof the composite stands | A pair standing in the sculpt software can still tip once painted and assembled |
| Contact type | Structural role | Mold consequence | Paint consequence |
|---|---|---|---|
| Arm wrapped over neck | Primary load path for the hug | Split hidden inside the wrap angle | Highest scuff risk in assembly; mask and touch-up station |
| Chest against flank | Stabilizes the pair laterally | Narrow gap needs draft so parts release | Crevices trap dust visually; edge definition matters |
| Hands clasped or resting | Cosmetic closure of the pose | Kept cosmetic with clearance, never load-bearing | Finger detail shows seam if split crosses the hand |
| Head tilted to head or shoulder | Emotional read of the scene | Silhouette split risk at the cheek line | Two face paints must match in tone where they meet |
| Boots and hooves shared footprint | Carries the composite gravity | One combined base area or a hidden insert | Sole paint same family across both characters |
| Accessory bridging both bodies | Ties the pair visually | Often molded separately and pegged | Bridge pieces are assembled last, after all paint |
| Cartoon decision | What it buys visually | Manufacturing cost | Our default |
|---|---|---|---|
| Shortened neck on the giraffe | Baby-animal charm, tighter composition | Raises head mass over a narrow load path | Compensate with wider hooves |
| Oversized heads on both characters | Instant cartoon read | Composite gravity moves up and sideways | Footprint recalculated for the pair |
| Plump, rounded bodies | Softness, approachability | Large draft-friendly surfaces, easy release | Cheap win; use freely |
| Thin raised arms in the wrap | Expressive gesture | Thin sections risk short shots and weak load | Thicken toward the shoulder, taper to the hand |
| Floating or touching-but-not-joined parts | Light, lively silhouette | Needs pegs and hidden joints | Convert to true contact or add an interlock |
| Extreme taper (tiny feet, huge body) | Comic stance | Footprint too small to stand | Hidden base insert or stance rewrite |